ONAMBA

機器内用

製品名

ONB多心(MVVS相当) 極細タイプ 多心編組シールド付き計装用ケーブル

英語名 : Super-small type multi-core instrumentation cables with braided shield
icon-pse.svg 製品記号について

用途 Applications

  • 主に100V未満の電子機器、計測器の配線用として使用され、特にノイズの影響のある場所に使用されます。
  • These products are widely used as wiring in electronic devices and measurement devices operating at less than 100 V, and are particularly used in locations
    affected by noise.

特長 Features

  • 軽量でしかも仕上外径が細く柔軟性がありますので、配線時の取り扱いが容易です。
  • 編組シールドを施していますので、放射ノイズや外部からのノイズの影響に対して高いノイズ除去効果及び優れた柔軟性が得られます。
  • 線心の識別は、13心までを色分けとし14心以上のものについては、ライン色及び組合せによって識別していますので、回路判別が容易です。
  • 絶縁体及びシースに鉛を含まない環境に優しいPVCを使用しております。(当社呼称 Pb Free)
  • ドレンワイヤー(縦添え)を施しているので、端末作業における加工を容易にします。
  • These products are lightweight, with a small finished outer diameter and good flexibility, for easy handling during wiring work.
  • The braided shield provides high noise removal performance to combat the effects of radiated noise and external noise, as well as excellent flexibility.
  • Colors are used to identify the wire cores for up to 13 cores. For cables with 14 cores or more, identification uses the line color and combination, allowing the circuit to be easily identified.
  • Environmentally-friendly, lead-free PVC is used for the insulator and sheath. (Onamba designation: Pb Free)
  • The presence of a drain wire (longitudinal) allows easy processing for terminal work.

構造図 Structural diagram

表面表示 Surface marking

ラインマーク例 Example of line mark

シース標準色 Sheath standard colors

Gray

使用上の注意 Precautions for use

ケーブルベア・ロボットアーム等の摺動性及び連続屈曲性を要求される環境下での使用はしないでください。

Do not use these products in cable carriers, robot arms, and other environments where sliding performance and continuous bending performance are required.

構造表 Structural table

線心数
No. of cores
導体(AC)
Conductor (AC)
絶縁体
Insulator
撚合
外径
Stranded
outer diameter

mm
シールド
厚 さ
Shield
thickness

mm
シース
厚 さ
Sheath
thickness

mm
仕上
外径
Finished
outer diameter

mm
許容電流
(参考値)
Maximum
permissible
current
(reference value)

A
概算
重量
Approximate
weight

kg/km
公 称
断面積
Nominal
cross-section
area

mm²
構成
素線数/素線径
Configuration
No. of wires/
Single wire diameter

本/mm
Wires/mm
外径
Outer diameter
mm
厚さ
Thickness
mm
外径
Outer diameter
mm
5C 0.3 12/0.18 0.7 0.3 1.3 3.5 0.3 1.0 6.2 3 60
0.5 20/0.18 0.9 0.3 1.5 4.1 0.3 1.0 6.8 4 80
0.75 30/0.18 1.1 0.3 1.7 4.6 0.3 1.0 7.3 5 95
1.25 50/0.18 1.5 0.4 2.3 6.2 0.3 1.0 8.9 8 145
2 37/0.26 1.8 0.4 2.6 7.0 0.3 1.0 9.7 10 185
6〜7C 0.3 12/0.18 0.7 0.3 1.3 3.9 0.3 1.0 6.6 3(3) 65(70)
0.5 20/0.18 0.9 0.3 1.5 4.5 0.3 1.0 7.2 4(4) 90(95)
0.75 30/0.18 1.1 0.3 1.7 5.1 0.3 1.0 7.8 5(5) 105(120)
1.25 50/0.18 1.5 0.4 2.3 6.9 0.3 1.0 9.6 7(7) 165(180)
2 37/0.26 1.8 0.4 2.6 7.8 0.3 1.0 10.5 10(9) 205(230)
8C 0.3 12/0.18 0.7 0.3 1.3 4.3 0.3 1.0 7.0 3 75
0.5 20/0.18 0.9 0.3 1.5 5.0 0.3 1.0 7.7 4 100
0.75 30/0.18 1.1 0.3 1.7 5.6 0.3 1.0 8.3 5 130
1.25 50/0.18 1.5 0.4 2.3 7.6 0.3 1.0 10.3 7 195
2 37/0.26 1.8 0.4 2.6 8.6 0.3 1.0 11.3 9 265
10C 0.3 12/0.18 0.7 0.3 1.3 5.2 0.3 1.0 7.9 2 90
0.5 20/0.18 0.9 0.3 1.5 6.0 0.3 1.0 8.7 3 120
0.75 30/0.18 1.1 0.3 1.7 6.8 0.3 1.0 9.5 4 155
1.25 50/0.18 1.5 0.4 2.3 9.2 0.3 1.0 11.9 6 250
2 37/0.26 1.8 0.4 2.6 10.4 0.35 1.0 13.4 8 340
12C 0.3 12/0.18 0.7 0.3 1.3 5.4 0.3 1.0 8.1 2 95
0.5 20/0.18 0.9 0.3 1.5 6.2 0.3 1.0 8.9 3 130
0.75 30/0.18 1.1 0.3 1.7 7.1 0.3 1.0 9.8 4 180
1.25 50/0.18 1.5 0.4 2.3 9.6 0.3 1.0 12.3 6 300
2 37/0.26 1.8 0.4 2.6 10.8 0.35 1.0 13.8 8 380
16C 0.3 12/0.18 0.7 0.3 1.3 6.1 0.3 1.0 8.8 2 125
0.5 20/0.18 0.9 0.3 1.5 7.1 0.3 1.0 9.8 3 170
0.75 30/0.18 1.1 0.3 1.7 8.0 0.3 1.0 10.7 4 225
1.25 50/0.18 1.5 0.4 2.3 10.8 0.35 1.1 13.8 5 365
20C 0.3 12/0.18 0.7 0.3 1.3 6.7 0.3 1.0 9.4 2 145
0.5 20/0.18 0.9 0.3 1.5 7.8 0.3 1.0 10.5 3 200
0.75 30/0.18 1.1 0.3 1.7 8.8 0.3 1.0 11.5 3 260
1.25 50/0.18 1.5 0.4 2.3 12.0 0.35 1.1 15.0 5 455
30C 0.3 12/0.18 0.7 0.3 1.3 8.3 0.3 1.0 11.0 2 210
0.5 20/0.18 0.9 0.3 1.5 9.6 0.3 1.0 12.3 2 280
0.75 30/0.18 1.1 0.3 1.7 10.9 0.35 1.1 13.9 3 375
1.25 50/0.18 1.5 0.4 2.3 14.8 0.35 1.2 18.0 4 740
  • 許容電流は、JCS第0168-1号に基づいて計算したもので参考値です。(周囲温度30°C、気中一条配線の場合)
  • ( )内の許容電流及び概算重量は、7心となります。
  • The maximum permissible currents are reference values calculated based on JCS No. 0168-1. (For ambient temperature 30°C and single cable in atmosphere)
  • Figures in ( ) for maximum permissible current and approximate weight are for a 7-core cable.

配列図 Sequence diagram

配列表 Sequence table

製品情報

製品検索

弊社や製品情報、導入実績などについて、お気軽にお問い合わせください。

お問い合わせ
TOP >